CPU
- Supports Socket A
for AMD® Athlon™/Athlon™ XP/Duron™ processors @FSB 200/266/333/400
- Supports 600MHz up
to Athlon™ XP 3000+ processor or higher
Chipset
- nVIDIA® nForce2
Ultra 400 Chipset
- Supports
DDR200/266/333/400
- Supports external
AGP 4X/8X
- nVIDIA® nForce2
MCP-T Chipset
- AC97 Interface
supporting up to two concurrent codecs
- Ultra ATA133 for
the fastest hard disk throughput
- USB 2.0 EHCI/1.1
OHCI controller
- FireWire® and USB
2.0 for the fastest digital connectivity
- Audio Processing
Unit(APU) encodes audio in Dolby® Digital 5.1 format for full surround
sound effects
FSB
- FSB 200/266/333/400
MHz clocks are supported
Main Memory
- Supports six memory
banks using three 184-pin DDR DIMMs
- Supports up to 3GB
PC3200/2700/2100/1600 DDR SDRAMs
- Supports both
64-bit and 128-bit DDR SDRAM
-
Note: nForce2 does NOT supports x4 memory device. 1GB can be made by other
density of dram chip such as x 8, x16.
Due
to the High Performance Memory design, motherboards or system configurations
may or may not operate smoothly at the JEDEC (Joint Electron Device
Engineering Council) standard settings (BIOS Default on the motherboard)
such as DDR voltage, memory speeds and memory timing. Please confirm and
adjust your memory setting in the BIOS accordingly for better system
stability.
Example: Kingston HyperX
DDR500 PC4000 operates at 2.65V, 3-4-4-8, CL=3.
For more information about specification of high performance memory modules,
please check with your Memory Manufactures for more details.
SLOTS
- One AGP
(Accelerated Graphics Port) 1.5V 4x/8x slot
- Five 32-bit PCI bus
slots (support 3.3v/5v PCI bus interface)
- One ACR (Advanced
Communication Riser) slot
BIOS
- The mainboard BIOS
provides "Plug & Play" BIOS which detects the peripheral devices and
expansion cards of the board automatically.
- The mainboard
provides a Desktop Management Interface (DMI) function which records your
mainboard specifications.
On-Board IDE
- An IDE controller
on the MCP-T chipset provides IDE HDD/CDROM with PIO, Bus Master and Ultra
DMA133/100/66 operation modes
- Can connect up to
four IDE devices
Serial ATA
Interface
- Support 2 serial
ATA plus 1 ATA133
- RAID O or 1 is
supported
- RAID function works
w/ATA133+SATA H/D or 2 SATA H/D
In-Chip IEEE1394
- nVIDIA MCP-T
IEEE1394 controller
- Support up to two
ports via external bracket
Network
- Chipset integrated
10/100 Base-T Ethernet/Fast Ethernet
Audio
- Realtek ALC650
6-channel audio
- Dolby Digital 5.1
format
On-Board
Peripherals
- 1 floppy port that
supports two FDD with 360KB, 720KB,1.44MB and 2.88MB
- 1 serial port
- 1 parallel port
supports SPP/EPP/ECP mode
- 3 audio ports in
vertical
- 2 IEEE1394
connectors
- 6 USB ports (Rear *
4/ Front * 2)
- 1 RJ-45 jack
Dimension
- 30.5 cm(L) x 23
cm(W) ATX Form Factor
|
